Behr Beach Foam S450-1
Contentsshow +hide -
| Code: | S450-1 |
| Name: | Beach Foam |
| Brand: | Behr |
What color is Behr Beach Foam?
Behr Beach Foam S450-1 is a pale blue-green with a cool, lightly grayed appearance. Its high lightness keeps it airy on broad walls, while the subtle cyan cast gives it more definition than a plain off-white. In daylight, Beach Foam can read as a clean, watery blue; under warmer bulbs, its gray-green side may become more noticeable. It suits bathrooms, bedrooms, and sunrooms, especially alongside crisp white trim, pale oak, weathered wood, or brushed nickel. For contrast, pair this shade with charcoal accents, deep navy textiles, or muted terracotta details.
Behr Beach Foam reviews (23 photos)
View the photos of real spaces painted with this blue that were not included in specific categories. Close-ups, painted furniture, storages and dressers, hallways, stairs and ceilings.
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Plan Home visualization
Try before you buy
100% accurate
reusable paint samples
Peel, stick,
and repeat
Twice painted
with real paint
Next day
delivery
What are Behr Beach Foam undertones?
Beach Foam is a light, very muted pale blue-green. The HEX sample has a subtle teal bias, but its low chroma turns that hue into a neutral-looking color rather than a clear teal. Warm bulbs may gray the color down, while cool daylight usually makes its blue or teal direction clearer.
HEX value:
RGB code:
205, 224, 225
Is Behr Beach Foam cool or warm?
warm
cool
With a hue of 183°, this Blue reads cool based on its HSL hue position.
S450-1 Beach Foam HSL code: 183, 25%, 84%
Hue - degree on a color wheel from 0 to 360. 0 is red, 120 is green, and 240 is blue.
Saturation is expressed as a percentage. At 0%, it appears as a shade of grey, and at 100%, it is in full color.
Lightness is also a percentage value. 0% is black, and 100% is white.
How light temperature affects Beach Foam
Natural Lighting. During the day, natural light shifts from about 2000 K at sunrise/sunset to 5500–6500 K at noon.
In addition, natural-light temperature depends on its direction:
| Direction of sunlight | Visible temp. | Hue | Duration |
|---|---|---|---|
| North | Cool | Bluish | All day |
| East | Warm | Yellow | Before noon |
| West | Warm | Orange-red | After noon |
| South | Warm | Orange-yellow | All day |
Artificial Lighting. When choosing bulbs, pay attention to their color temperature in Kelvins.
Use the slider to see how this Blue shade looks under different lighting:
4000K
Coordinating colors.
Colors that go with Behr Beach Foam:
Monochromatic color scheme
This scheme consists of various shades, tints, and tones of a single color. While it offers a perfect combination of hues, without accent décor it may become monotonous.
Lighter shades
Darker shades
Complementary color scheme
This color scheme is a combination of two shades that are opposite each other on the color wheel. The high contrast between these colors creates a vibrant and dynamic visual effect. For the color Beach Foam with a green hue, complementary colors are those with a red hue close to 3, such as Behr Autumn Ashes and Piano Brown.
LRV of Beach Foam
Beach Foam has an LRV of 70.3% and refers to Light colors that reflect most of the incident light. Why LRV is important?
Light Reflectance Value measures the amount of visible and usable light that reflects from a painted surface.
Simply put, the higher the LRV of a paint color, the brighter the room you will get.
The scale goes from 0% (absolute black, absorbing all light) to 100% (pure white, reflecting all light).
Act like a pro: When choosing paint with an LRV of 70.3%, pay attention to your bulbs' brightness. Light brightness is measured in lumens. The lower the paint's LRV, the higher lumen level you need. Every square foot of room needs at least 40 lumens. That means for a 200 ft2 living room you'll need about 8000 lumens of light – e.g., eight 1000 lm bulbs.
Color codes
We have collected almost every possible color code you could ever need.
Not sure what the difference between HEX and RGB is? We break down color models in plain language. Understanding color models
| Format | Code |
|---|---|
| HEX | #cde0e1 |
| RGB Decimal | 205, 224, 225 |
| RGB Percent | 80.39%, 87.84%, 88.24% |
| HSV | Hue: 183° Saturation: 8.89% Value: 88.24% |
| HSL | hsl(183, 25, 84) |
| CMYK | Cyan: 8.89 Magenta: 0.44 Yellow: 0.0 Key: 11.76 |
| YIQ | Y: 218.433 I: -11.643 Q: -3.708 |
| XYZ | X: 65.419 Y: 71.726 Z: 81.612 |
| CIE Lab | L:87.836 a:-6.11 b:-2.646 |
| CIE Luv | L:87.836 u:-10.345 v:-3.005 |
| Decimal | 13492449 |
| Hunter Lab | 84.691, -10.328, 2.15 |
Color equivalents
T633
Barest Hint of Blue
Valspar US
V102-1
Snow in June
Valspar US
CW-585
Ewing Blue
Benjamin Moore
1667
Blue Haze
Benjamin Moore
1653
Glacier Blue
Benjamin Moore
SW 6784
Bravo Blue
Sherwin Williams
5001-5A
Lament Blue
Valspar US
HDC-CT-16B
Waterfall
Behr
2135-60
Summer Shower
Benjamin Moore
SW 6491
Open Air
Sherwin Williams
2123-50
Ocean Air
Benjamin Moore
SW 6791
Lauren's Surprise
Sherwin Williams
SW 6498
Byte Blue
Sherwin Williams
1639
Windy Sky
Benjamin Moore
8004-39A
Cold as Ice
Valspar US
P105
Open Skies
Valspar US
M337
Buoyant Blue
Valspar US
1660
Polar Ice
Benjamin Moore