Behr Glass Sapphire PPU14-02
Contentsshow +hide -
- Behr Glass Sapphire reviews (23 photos)
- What are Behr Glass Sapphire undertones?
- Is Glass Sapphire PPU14-02 cool or warm?
- How light temperature affects on Glass Sapphire
- Monochromatic color scheme
- Complementary color scheme
- Color comparison and matching
- LRV of Glass Sapphire PPU14-02
- Color codes
- Color equivalents
| Code: | PPU14-02 |
| Name: | Glass Sapphire |
| Brand: | Behr |
What color is Behr Glass Sapphire?
Behr Glass Sapphire PPU14-02 is a medium, muted blue with a noticeable gray cast that keeps it from reading overly bright. Its cool blue character can look a little softer and smokier in low light, while daylight brings out its clearer blue presence. Use it on bedroom or bath walls for measured color, or on cabinetry and a front door where its depth can stand against light trim. Creamy whites, pale gray, weathered oak, brushed nickel, and charcoal accents give this shade a grounded, clean-looking setting.
Behr Glass Sapphire reviews (23 photos)
View the photos of real spaces painted with this blue that were not included in specific categories. Close-ups, painted furniture, storages and dressers, hallways, stairs and ceilings.























Try before you buy

100% accurate
reusable paint samples
Peel, stick,
and repeat
Twice painted
with real paint
Next day
delivery
What are Behr Glass Sapphire undertones?
Glass Sapphire is a midtone, soft slate blue. The HEX sample leans blue; this describes its measurable digital hue direction, not a hidden paint pigment. Warm bulbs may gray the color down, while cool daylight usually makes its blue or teal direction clearer.
HEX value:
RGB code:
88, 123, 155
Is Behr Glass Sapphire cool or warm?
With a hue of 209°, this dark blue reads cool based on its HSL hue position.
PPU14-02 Glass Sapphire HSL code: 209, 28%, 48%
Hue - degree on a color wheel from 0 to 360. 0 is red, 120 is green, and 240 is blue.
Saturation is expressed as a percentage. At 0%, it appears as a shade of grey, and at 100%, it is in full color.
Lightness is also a percentage value. 0% is black, and 100% is white.
How light temperature affects Glass Sapphire
Natural Lighting. During the day, natural light shifts from about 2000 K at sunrise/sunset to 5500–6500 K at noon.
In addition, natural-light temperature depends on its direction:
| Direction of sunlight | Visible temp. | Hue | Duration |
|---|---|---|---|
| North | Cool | Bluish | All day |
| East | Warm | Yellow | Before noon |
| West | Warm | Orange-red | After noon |
| South | Warm | Orange-yellow | All day |
Artificial Lighting. When choosing bulbs, pay attention to their color temperature in Kelvins.
Use the slider to see how this dark blue shade looks under different lighting:


4000K
Coordinating colors.
Colors that go with Behr Glass Sapphire:
Monochromatic color scheme
This scheme consists of various shades, tints, and tones of a single color. While it offers a perfect combination of hues, without accent décor it may become monotonous.
Lighter shades
PPU14-02
Glass Sapphire
Darker shades
PPU14-02
Glass Sapphire
Complementary color scheme
This color scheme is a combination of two shades that are opposite each other on the color wheel. The high contrast between these colors creates a vibrant and dynamic visual effect. For the color Glass Sapphire with a green hue, complementary colors are those with a red hue close to 29, such as Behr Oak Creek and Chicago Fog.
LRV of Glass Sapphire
Glass Sapphire has an LRV of 17.69% and refers to Medium Dark which means that this color reflects very little light. Why LRV is important?
Light Reflectance Value measures the amount of visible and usable light that reflects from a painted surface.
Simply put, the higher the LRV of a paint color, the brighter the room you will get.
The scale goes from 0% (absolute black, absorbing all light) to 100% (pure white, reflecting all light).
Act like a pro: When choosing paint with an LRV of 17.69%, pay attention to your bulbs' brightness. Light brightness is measured in lumens. The lower the paint's LRV, the higher lumen level you need. Every square foot of room needs at least 40 lumens. That means for a 200 ft2 living room you'll need about 8000 lumens of light – e.g., eight 1000 lm bulbs.
Color codes
We have collected almost every possible color code you could ever need.
Not sure what the difference between HEX and RGB is? We break down color models in plain language. Understanding color models
| Format | Code |
|---|---|
| HEX | #587b9b |
| RGB Decimal | 88, 123, 155 |
| RGB Percent | 34.51%, 48.24%, 60.78% |
| HSV | Hue: 209° Saturation: 43.23% Value: 60.78% |
| HSL | hsl(209, 28, 48) |
| CMYK | Cyan: 43.23 Magenta: 20.65 Yellow: 0.0 Key: 39.22 |
| YIQ | Y: 116.183 I: -31.14 Q: 2.555 |
| XYZ | X: 17.021 Y: 18.606 Z: 33.696 |
| CIE Lab | L:50.223 a:-3.613 b:-21.103 |
| CIE Luv | L:50.223 u:-17.253 v:-30.522 |
| Decimal | 5798811 |
| Hunter Lab | 43.135, -5.048, -16.122 |
Color equivalents
8002-45E
Peyton
Valspar US
MQ5-53
Privileged Elite
Behr
T612
Flattering Blue
Valspar US
V109-5
Goddess of the Nile
Valspar US
8003-46E
Indigo Dreams
Valspar US
V073-5
Smoky Violet
Valspar US
PPU14-18
Laguna Blue
Behr
SW 6963
Sapphire
Sherwin Williams
SW 6810
Lupine
Sherwin Williams

PPU14-01
Arrowhead Lake
Behr

CW-620
Finley Blue
Benjamin Moore
T601
Merman
Valspar US
CSP-560
Nile Blue
Benjamin Moore

P074
Deepest Periwinkle
Valspar US
1679
Bedford Blue
Benjamin Moore

S510-5
Skinny Jeans
Behr



