Behr White City N140-1

Contents
show +hide -
Code:N140-1
Name:White City
Brand:Behr

What color is Behr White City?

Behr White City N140-1 is a pale, muted off-white with a soft warm-gray cast and a faint blush-beige undertone. Its low saturation keeps it from reading creamy or stark, giving walls a lightly weathered, plaster-like appearance. In bright daylight, White City can look airy and almost neutral, while lower or warmer light brings out its gentle beige-pink warmth. It suits living rooms, bedrooms, and open hallways where a plain white might feel too sharp. Pair it with natural oak, linen upholstery, warm metal finishes, and deeper taupe or charcoal accents for definition.

Try before you buy

Samplize samples on the wall

100% accurate
reusable paint samples

Peel, stick and repeat

Peel, stick,
and repeat

Twice painted samples

Twice painted
with real paint

Fast delivery

Next day
delivery

Shop now

What are Behr White City undertones?

White City is a light, near-neutral light gray. Its chroma is so low that assigning a specific hue-based undertone would be misleading. Because it is close to neutral, nearby surfaces and the color of the light can noticeably change how warm or cool it appears.

HEX value:

#D6D0CC

RGB code:

214, 208, 204

Is Behr White City cool or warm?

warm
cool
Color wheel

With a hue of 24°, this Grey leans warm, but it is close to neutral and can read cooler in some light.

N140-1 White City HSL code: 24, 11%, 82%

Hue - degree on a color wheel from 0 to 360. 0 is red, 120 is green, and 240 is blue.
Saturation is expressed as a percentage. At 0%, it appears as a shade of grey, and at 100%, it is in full color.
Lightness is also a percentage value. 0% is black, and 100% is white.

How light temperature affects White City

Natural Lighting. During the day, natural light shifts from about 2000 K at sunrise/sunset to 5500–6500 K at noon.

Bedroom daylight mockup
Bedroom overlay
Sunrise
Morning
Noon
Afternoon
Sunset

In addition, natural-light temperature depends on its direction:

Direction of sunlightVisible temp.HueDuration
NorthCoolBluishAll day
EastWarmYellowBefore noon
WestWarmOrange-redAfter noon
SouthWarmOrange-yellowAll day

Artificial Lighting. When choosing bulbs, pay attention to their color temperature in Kelvins.
Use the slider to see how this Grey shade looks under different lighting:

Living-room mockup
Living-room overlay

4000K

2000K
3000K
4000K
5000K
6000K
7000K

Coordinating colors.
Colors that go with Behr White City:

Monochromatic color scheme

Monochromatic color scheme

This scheme consists of various shades, tints, and tones of a single color. While it offers a perfect combination of hues, without accent décor it may become monotonous.

Lighter shades

Darker shades

Complementary color scheme

Complementary color scheme

This color scheme is a combination of two shades that are opposite each other on the color wheel. The high contrast between these colors creates a vibrant and dynamic visual effect. For the color White City with a red hue, complementary colors are those with a green hue close to 204, such as Behr Nor'Wester and Absolute Zero.

LRV of White City

White City has an LRV of 63.88% and refers to Light colors that reflect most of the incident lightWhy LRV is important?

Light Reflectance Value scale illustration

Light Reflectance Value measures the amount of visible and usable light that reflects from a painted surface.
Simply put, the higher the LRV of a paint color, the brighter the room you will get.
The scale goes from 0% (absolute black, absorbing all light) to 100% (pure white, reflecting all light).

Act like a pro: When choosing paint with an LRV of 63.88%, pay attention to your bulbs' brightness. Light brightness is measured in lumens. The lower the paint's LRV, the higher lumen level you need. Every square foot of room needs at least 40 lumens. That means for a 200 ft2 living room you'll need about 8000 lumens of light – e.g., eight 1000 lm bulbs.

Color codes

We have collected almost every possible color code you could ever need.
Not sure what the difference between HEX and RGB is? We break down color models in plain language. Understanding color models

FormatCode
HEX#d6d0cc
RGB Decimal214, 208, 204
RGB Percent83.92%, 81.57%, 80.00%
HSVHue: 24° Saturation: 4.67% Value: 83.92%
HSLhsl(24, 11, 82)
CMYKCyan: 0.0 Magenta: 2.8 Yellow: 4.67 Key: 16.08
YIQY: 209.338 I: 4.861 Q: 0.024
XYZX: 61.184 Y: 63.768 Z: 66.196
CIE LabL:83.845 a:1.356 b:2.718
CIE LuvL:83.845 u:3.68 v:3.834
Decimal14078156
Hunter Lab79.855, -2.981, 6.75

Color equivalents