Benjamin Moore Harbor Fog 2062-70
Contentsshow +hide -
- Benjamin Moore Harbor Fog reviews (2 photos)
- What are Benjamin Moore Harbor Fog undertones?
- Is Harbor Fog 2062-70 cool or warm?
- How light temperature affects on Harbor Fog
- Monochromatic color scheme
- Complementary color scheme
- Color comparison and matching
- LRV of Harbor Fog 2062-70
- Color codes
- Color equivalents
| Official page: | Harbor Fog 2062-70 |
| Code: | 2062-70 |
| Name: | Harbor Fog |
| Brand: | Benjamin Moore |
What color is Benjamin Moore Harbor Fog?
Benjamin Moore Harbor Fog 2062-70 is a very light, cool blue with a soft watery cast and low, airy saturation. Its pale blue-green direction is most noticeable in daylight, while warmer indoor bulbs can make it appear gentler and slightly grayer. This shade is well suited to bathroom walls, ceilings, or a light-filled bedroom where a near-pastel color feels appropriate without reading overly sweet. Pair Harbor Fog with crisp white trim, pale oak, brushed nickel, and charcoal accents for contrast. Because it is so light, it has the most presence across broad wall surfaces rather than as a small accent.
Benjamin Moore Harbor Fog reviews (2 photos)
View the photos of real spaces painted with this blue that were not included in specific categories. Close-ups, painted furniture, storages and dressers, hallways, stairs and ceilings.


Try before you buy

100% accurate
reusable paint samples
Peel, stick,
and repeat
Twice painted
with real paint
Next day
delivery
What are Benjamin Moore Harbor Fog undertones?
Harbor Fog is a light, very muted cool off-white. The HEX sample has a subtle teal bias, but its low chroma turns that hue into a neutral-looking color rather than a clear teal. Warm bulbs may gray the color down, while cool daylight usually makes its blue or teal direction clearer.
HEX value:
RGB code:
211, 231, 237
Is Benjamin Moore Harbor Fog cool or warm?
At 194° on the HSL hue wheel, this Blue falls clearly in the cool range.
2062-70 Harbor Fog HSL code: 194, 42%, 88%
Hue - degree on a color wheel from 0 to 360. 0 is red, 120 is green, and 240 is blue.
Saturation is expressed as a percentage. At 0%, it appears as a shade of grey, and at 100%, it is in full color.
Lightness is also a percentage value. 0% is black, and 100% is white.
How light temperature affects Harbor Fog
Natural Lighting. During the day, natural light shifts from about 2000 K at sunrise/sunset to 5500–6500 K at noon.
In addition, natural-light temperature depends on its direction:
| Direction of sunlight | Visible temp. | Hue | Duration |
|---|---|---|---|
| North | Cool | Bluish | All day |
| East | Warm | Yellow | Before noon |
| West | Warm | Orange-red | After noon |
| South | Warm | Orange-yellow | All day |
Artificial Lighting. When choosing bulbs, pay attention to their color temperature in Kelvins.
Use the slider to see how this Blue shade looks under different lighting:
Coordinating colors.
Colors that go with Benjamin Moore Harbor Fog:
Monochromatic color scheme
This scheme consists of various shades, tints, and tones of a single color. While it offers a perfect combination of hues, without accent décor it may become monotonous.
Darker shades
Complementary color scheme
This color scheme is a combination of two shades that are opposite each other on the color wheel. The high contrast between these colors creates a vibrant and dynamic visual effect. For the color Harbor Fog with a green hue, complementary colors are those with a red hue close to 14, such as Benjamin Moore Quietly Violet and Desert Shadows.
LRV of Harbor Fog
Harbor Fog has an LRV of 74.75% and refers to Off‑White colors that reflect a lot of light. Why LRV is important?
Light Reflectance Value measures the amount of visible and usable light that reflects from a painted surface.
Simply put, the higher the LRV of a paint color, the brighter the room you will get.
The scale goes from 0% (absolute black, absorbing all light) to 100% (pure white, reflecting all light).
Act like a pro: When choosing paint with an LRV of 74.75%, pay attention to your bulbs' brightness. Light brightness is measured in lumens. The lower the paint's LRV, the higher lumen level you need. Every square foot of room needs at least 40 lumens. That means for a 200 ft2 living room you'll need about 8000 lumens of light – e.g., eight 1000 lm bulbs.
Color codes
We have collected almost every possible color code you could ever need.
Not sure what the difference between HEX and RGB is? We break down color models in plain language. Understanding color models
| Format | Code |
|---|---|
| HEX | #D3E7ED |
| RGB Decimal | 211, 231, 237 |
| RGB Percent | 82.75%, 90.59%, 92.94% |
| HSV | Hue: 194° Saturation: 10.97% Value: 92.94% |
| HSL | hsl(194, 42, 88) |
| CMYK | Cyan: 10.97 Magenta: 2.53 Yellow: 0.0 Key: 7.06 |
| YIQ | Y: 225.704 I: -13.846 Q: -2.364 |
| XYZ | X: 70.721 Y: 77.114 Z: 91.256 |
| CIE Lab | L:90.374 a:-5.43 b:-5.163 |
| CIE Luv | L:90.374 u:-11.044 v:-7.075 |
| Decimal | 13887469 |
| Hunter Lab | 87.815, -9.921, -0.144 |
Color equivalents
P500-1
Spacious Skies
Behr
S490-1
Permafrost
Behr
2063-70
Cumulus Cotton
Benjamin Moore

2058-70
Blue Angel
Benjamin Moore
792
Mystical Blue
Benjamin Moore

2057-70
Icy Blue
Benjamin Moore
SW 6784
Bravo Blue
Sherwin Williams

SW 6791
Lauren's Surprise
Sherwin Williams

2053-70
Morning Sky Blue
Benjamin Moore
SW 7134
Tibetan Sky
Sherwin Williams
2061-70
Caribbean Mist
Benjamin Moore
M520-1A
Soft Cloud
Behr

SW 6798
Iceberg
Sherwin Williams

813
Sweet Bluette
Benjamin Moore

1674
Polar Sky
Benjamin Moore

