Benjamin Moore Pink Fairy 2006-70
Contentsshow +hide -
- Benjamin Moore Pink Fairy reviews (23 photos)
- What are Benjamin Moore Pink Fairy undertones?
- Is Pink Fairy 2006-70 cool or warm?
- How light temperature affects on Pink Fairy
- Monochromatic color scheme
- Complementary color scheme
- Color comparison and matching
- LRV of Pink Fairy 2006-70
- Color codes
- Color equivalents
| Official page: | Pink Fairy 2006-70 |
| Code: | 2006-70 |
| Name: | Pink Fairy |
| Brand: | Benjamin Moore |
What color is Benjamin Moore Pink Fairy?
Benjamin Moore Pink Fairy 2006-70 is a very light, softly tinted pink with a powdery appearance and low saturation. Its pale red cast reads gentle rather than sugary, especially across larger wall areas. In warm artificial light, Pink Fairy can appear a touch rosier, while cooler daylight brings out its airy, nearly pastel quality. It suits bedrooms, nurseries, dressing areas, and powder rooms where a faint wash of color is preferred over a stronger pink statement. Pair it with soft white trim, pale oak, linen upholstery, brushed nickel, or muted gray-beige accents to keep the room looking clean and grounded.
Benjamin Moore Pink Fairy reviews (23 photos)
View the photos of real spaces painted with this pink that were not included in specific categories. Close-ups, painted furniture, storages and dressers, hallways, stairs and ceilings.























Try before you buy

100% accurate
reusable paint samples
Peel, stick,
and repeat
Twice painted
with real paint
Next day
delivery
What are Benjamin Moore Pink Fairy undertones?
Pink Fairy is a near-white, very muted warm off-white. The HEX sample has a subtle red bias, but its low chroma turns that hue into a neutral-looking color rather than a clear red. Warm bulbs can make it look creamier or more golden, while cool daylight may mute that warmth and pull it closer to beige or greige.
HEX value:
RGB code:
250, 224, 224
Is Benjamin Moore Pink Fairy cool or warm?
At 0° on the HSL hue wheel, this Pink sits firmly on the warm side.
2006-70 Pink Fairy HSL code: 0, 72%, 93%
Hue - degree on a color wheel from 0 to 360. 0 is red, 120 is green, and 240 is blue.
Saturation is expressed as a percentage. At 0%, it appears as a shade of grey, and at 100%, it is in full color.
Lightness is also a percentage value. 0% is black, and 100% is white.
How light temperature affects Pink Fairy
Natural Lighting. During the day, natural light shifts from about 2000 K at sunrise/sunset to 5500–6500 K at noon.
In addition, natural-light temperature depends on its direction:
| Direction of sunlight | Visible temp. | Hue | Duration |
|---|---|---|---|
| North | Cool | Bluish | All day |
| East | Warm | Yellow | Before noon |
| West | Warm | Orange-red | After noon |
| South | Warm | Orange-yellow | All day |
Artificial Lighting. When choosing bulbs, pay attention to their color temperature in Kelvins.
Use the slider to see how this Pink shade looks under different lighting:


4000K
Coordinating colors.
Colors that go with Benjamin Moore Pink Fairy:
Monochromatic color scheme
This scheme consists of various shades, tints, and tones of a single color. While it offers a perfect combination of hues, without accent décor it may become monotonous.
Darker shades
Complementary color scheme
This color scheme is a combination of two shades that are opposite each other on the color wheel. The high contrast between these colors creates a vibrant and dynamic visual effect. For the color Pink Fairy with a red hue, complementary colors are those with a green hue close to 180, such as Benjamin Moore Copper Patina and Key Largo Green.
LRV of Pink Fairy
Pink Fairy has an LRV of 77.08% and refers to Off‑White colors that reflect a lot of light. Why LRV is important?
Light Reflectance Value measures the amount of visible and usable light that reflects from a painted surface.
Simply put, the higher the LRV of a paint color, the brighter the room you will get.
The scale goes from 0% (absolute black, absorbing all light) to 100% (pure white, reflecting all light).
Act like a pro: When choosing paint with an LRV of 77.08%, pay attention to your bulbs' brightness. Light brightness is measured in lumens. The lower the paint's LRV, the higher lumen level you need. Every square foot of room needs at least 40 lumens. That means for a 200 ft2 living room you'll need about 8000 lumens of light – e.g., eight 1000 lm bulbs.
Color codes
We have collected almost every possible color code you could ever need.
Not sure what the difference between HEX and RGB is? We break down color models in plain language. Understanding color models
| Format | Code |
|---|---|
| HEX | #FAE0E0 |
| RGB Decimal | 250, 224, 224 |
| RGB Percent | 98.04%, 87.84%, 87.84% |
| HSV | Hue: 0° Saturation: 10.4% Value: 98.04% |
| HSL | hsl(0, 72, 93) |
| CMYK | Cyan: 0.0 Magenta: 10.4 Yellow: 10.4 Key: 1.96 |
| YIQ | Y: 231.774 I: 15.493 Q: 5.5 |
| XYZ | X: 79.532 Y: 79.019 Z: 81.563 |
| CIE Lab | L:91.243 a:8.911 b:3.263 |
| CIE Luv | L:91.243 u:15.315 v:3.311 |
| Decimal | 16441568 |
| Hunter Lab | 88.892, 4.143, 7.823 |


